Consultancy Services for Heating, Plumbing and Renewable Energy
Exothermic Installations Ltd providing professional consultancy for heating, plumbing and renewable energy in the in the Swindon, Newbury and surrounding areas.
We operate different levels of consultancy from a simple “What are our options?” - which is by far our most common consultancy, when people are looking at replacement or alteration of an existing system or thinking of building a new house. To full conceptual and system design along with full mechanical and electrical calculations, heat loss calculations, flow rate calculations, water usage calculations, ventilation calculations (MVHR systems), CAD drawings etc, etc.
We are also increasingly being asked to consult on and rectify other companies installations - especially renewable energy. We operate on a fixed fee or hourly basis depending on your project and requirements - contact us for more information.
How can we help you?
As we have been qualified heating engineers and installers for over 34 consecutive years and renewable heating and energy installers for the last 10 years - we have the experience and the knowledge to advise you on the best solution for your particular situation. We can advise you on all of the options, likely fuel cost and carbon savings and the pros and the cons of each. As we are qualified and experienced in all of the fuel technologies, we have no bias to either, so we can give you truly impartial advice. As well as questions like “Can we fit it in our property?” and “Will it work?” - We can advise you on planning and building regulations compliance.
We use all of experience and knowledge to advise you and help you to select the right solution for your own project and your own unique requirements. We advise you on the technologies available, selection of the right products and manufacturers for the job, the best system options and components available, the best control options and products available and advise on available grant funding and how to access it!
This allows us to compile an initial outline for your consideration and then a detailed specification for your approval for your project. From this we can give you a fixed quotation for the works and you are free to get other quotes based upon this detailed specification. For your peace of mind we will even refund our consultancy fee to you (terms apply) when you proceed with us for the installation.
If you proceed with another installer, then you know that you have got exactly what you wanted, hassle free, with no pressure, no dodgy sales or special “today only deals” or “one off” discounts - at the most competitive, fairest and realistic price. We don't think you can get a better or fairer than that!
So why consult?
When companies are competing for business, they have to be just that - competitive. But what does a price tell you? If you get 10 estimates, you get 10 prices. Why is there such a variation in the range of the prices? What are the reasons for the price variations and what does it mean?
Unless all the companies are pricing to the exact same detailed specification and parameters - they mean absolutely nothing! There is no other comparison other than the price! Its just a lucky dip - Good luck!
So why are they all charging different hourly rates?
A good professional company knows its worth and charges accordingly for professional quality installation that is fully compliant with all rules and regulations in force and gives good customer service. If you pay peanuts - you get monkeys! Beware of cheap installations.
Why are they all differing in time to complete the works?
This will vary depending on quality of workmanship and quality and specification of installation. Speed isn’t everything! Why cut corners just to save time?
What other parameters are there? - it can't be that difficult!
What fuel type? Gas, LPG, Oil, Solid fuel, Biomass, Air source or Ground source heat pump? What about a hybrid system? New build or retrofit? Alteration, extension or replacement? Is it open vented or sealed? What is the condition of the existing system? What are the options and alternatives? Is there any grant funding available?
What major products are they using? What boiler or heat pump? What cylinders?
Economy (false) brand or top quality manufacturer with a strong manufacturers guarantee and good customer support
Pipework and fittings
What pipe work and fittings are they using?
Rigid Copper, Stainless or carbon steel? Semi rigid Alupex? Plastic - polybutylene or polyethylene?
Are the fittings glued, screwed, soldered, braised, welded, push fit? Or is it Machine press or expansion fit?
What components are they using? What control valves, pumps, isolation valves
Economy (false) brand or top quality manufacturer?
What brand and what level of controls are they using?
Economy (false) brand or top quality? Are they wired, standard voltage or extra low voltage? Or are they wireless, touch screen, digital or analogue? Are they able to be controlled from a smartphone or tablet? How many zones are there?
The installation company and compliant procedures
- Do all company practices comply with Health and safety? (consider your family and property health and safety first)
- Are they legally competent to carry out and certify the work? (see competency page)
- Do they use subcontractors - and are they legally competent and insured? Do they have policies and procedures in place to ensure this?
- Are they fully insured for the work they are undertaking?
- Do they provide a written insurance backed warranty with their work?
- Do they provide a written contract and staged payment plan that complies with consumer protection legislation?
- Do they provide a deposit payment insurance for your peace of mind?
- Can they give you a detailed breakdown of estimated running costs and carbon production for the proposed system?
- Can they estimate how much fuel and carbon savings you will make from the proposed improvements to the system?
When working on plumbing and/or heating systems
- Do they chemically powerflush and clean the existing system before altering it?
- Do they flush and clean and inhibit the system after altering it? Then add glycol solution if there’s a risk of freezing during power failure?
- Do they fit an in-line filter and magnet to trap any sediment and ferrous material to protect the heating system and boiler?
- Do they fit scale prevention device? An economy (false) span magnet or recommend a quality branded water softener
- Do they provide a handover pack with - All manufacturers instructions and guarantees?
- Do they provide a schematic of the pipework and the electrical system and the major components installed?
- Do they carry out and evidence any design? Do they at least carry out heat loss calculations to BSEN12831 to ascertain correct emitter and boiler design and specification? Or whole house boiler sizing using SAP?
- Are they actually experienced in the work they are undertaking?
- Do they self certify and register the works as being compliant with building regulations and register works undertaken with a governing body and notify your local building control and provide you with the evidence?
What about renewable energy?
What type? Pellet, chip, or log? Is it a smoke control area? What size boiler? Is it a boiler or stove or fire? What type of system? Open vented or sealed? With or without a buffer? What space is available for the fuel store? How far is the store away from the boiler? Fabric silo or sheet steel? Do you want auto fuel feed or manual? Auger or vacuum? Do you want auto clean or manual?, do you want ash compaction?
Air source heat pump
Do you need planning? Do you need DNO permission? Single or three phase? Does it comply with noise restrictions? What type? Split or mono bloc? What size output? What’s the design flow temperature? Are the existing emitters suitable? What type of system? Open vented or sealed? With or without a buffer? How far is the heat pump away from the property?
Ground source heat pump
In addition to the above for air source - Is it to run on an off peak tariff? Do you require boreholes or ground loops? What is the soil or rock composition?
Do you need planning? Do you need a structural roof survey? What type of solar thermal system? What size of system? What collector panel? Flat plate or Evacuated tube? On roof or in roof? What pitch and orientation? What about shading? Drain-back or sealed? What method of heating the water? Thermal store, twin coil cylinder, Plate heat exchanger?
Do you need planning? Do you need a structural roof survey? What type of Solar PV system? What size of array? On grid off grid? On roof, in roof or ground mount? What pitch and orientation? How much shading? What type of panel? Poly, mono, hybrid, gallium? black, silver framed or all black? What mounting system is being used? What type of inverter? Is it multi or single string? What type of tracking? Do you want micro-inverters or individual optimisers? Can it be monitored? At array level or panel level?
What size storage tank? Above ground or below? Will it provide all the water you need? What if it runs out? Do you need planning? Can you irrigate your garden? Can you water your garden during a hosepipe ban? Can it be connected to a washing machine? Do you need to alter your plumbing? Can you drink it?
The above lists of questions are just some of the variables involved. Any single one of these will have an impact on the final estimated price. The only real way to get a meaningful price is to have an open and honest discussion, to find out what suits you best. To get friendly impartial professional advice Click to call today to see how we can help you.